ON-SCREEN SET UP | 17
First Time Setup menu
When you turn the TV on for the first time, the First Time
Setup menu will appear.
Follow the prompts using the
/ / / /
OK
buttons
to select your preferences. You will be guided through:
3. Set Time
4. Usage Mode 5. Connect to the Internet 6. Sign into Netflix
7. Select Input Source
8. Scan Channels
If you make an error, you can update your preferences in
the settings menu later.
Note: If you choose to setup Netflix or select an input source other
than DTV, the set up wizard will exit and will not let you tune TV
channels. To tune channels, go to Menu>TV>Auto Scan.
Make sure the TV is plugged in at
the power socket and switched
on. Press the (ON) button to
turn on the TV.
On-Screen Set Up
Make sure equipment is properly connected (as shown on pages
10-11) before connecting the TV to power.
If you are using a wired network, connect an ethernet cable
to the TV; select 'Wired Network' and 'Connect'. The TV will
automatically connect to the Internet.
If you are using a wireless connection, select 'Wi-Fi Network'.
The TV will scan for nearby wireless networks. Make sure that
the TV is within the range of your wireless modem/router, and
you have your Wi-Fi password handy. Select your network,
enter network password using the on-screen keyboard and
select ENTER. Press OK to connect.
Or, you can connect to the internet later by going to the User
Menu settings.
On/Standby light is
WHITE in standby mode.
On/Standby light is OFF
when the TV is on.
5. Connect to the Internet
Summary of Contents for ATV65UHDS-1221
Page 2: ...2 Welcome...
Page 51: ...51 Notes...
