Listening to an external audio device (AUX mode)
12
Playback controls
• After pairing to a Bluetooth device, use either the controls on your connected
Bluetooth device or the
/
/
/ buttons
19
/
17
/
18
/
5
on the front
panel of the turntable to play, pause, select a track, skip or stop it.
• Audio played through the connected Bluetooth device will now be heard
through the stereo speakers
3
.
• Adjust the sound volume either using the
VOLUME
knob
16
on the front panel
of the turntable or on your connected Bluetooth device.
Disconnecting a Bluetooth device
• Switch off or erase the pairing from the connected Bluetooth device manually.
Listening to an external audio device
(AUX mode)
This device can play audio from an external audio device in AUX mode with an AUX
cable (not included).
1. Turn the selection knob
8
to
AUX
.
AU
indicator will be lit on the display panel.
2. Connect one end of a 3.5 mm AUX-IN cable (not included) into
the 3.5 mm AUX-IN jack
14
of the device and the other end
to your external audio device, such as CD player, tablet, MP3
player, smartphone, etc.
3. Start playback on your external audio device.
The stereo speakers
3
will output the sound.
• The volume output is affected by the volume level on your
connected audio device. Ensure that the source volume is
set to about 70–80 % to avoid sound distortion.
• Playback must be controlled from your connected audio
device while using AUX mode.
VOLUME
AUX
OPEN /
CLOSE
REP/PROG
FM / BLUETOOTH
AUX
FM
BLUETOOTH
TUNING
REC
PLAY
REP
PROG
