Setup/Basic operation
7
Setup/Basic operation
Setup
1. Unpack the device and keep all packaging materials until you have made sure
your new device is undamaged and in good working order.
2. Place the device on a flat and level surface that is free from vibration.
3. Before first use, remove the black plastic tie-wrap that is
holding the tone arm
30
.
4. Detach the stylus guard (white plastic cover) by pulling it
straight off the stylus cartridge
35
.
Power connection
1. Plug the smaller end of the power adapter
26
into the power input jack
25
on
the back of the device.
2. Plug the power adapter into an appropriate power outlet (100–240 V).
3. Press the
POWER
button
10
to power the device on or off.
Using headphones
Connect headphones (not provided) to the headphone jack
13
for private listening.
The stereo speakers
3
will not work if you use headphones.
WARNING:
Do not adjust the headphone volume too high. There is danger of hearing
impairment.
Using external speakers
This feature enables you to play audio on the device through
external speakers. You need an RCA cable (not included) to make
this connection.
Plug one end of the
L
(white) and
R
(red) RCA jacks into the
RCA
output jacks
24
at the back of the device, and the other end into
L
(white) and
R
(red) RCA jacks at the back of the external speakers.
Listening to a vinyl record
1. Lift the turntable cover
1
all the way up until the cover
support latch
2
stops and fully opens. Push the latch
forwards with some pressure if necessary.
