3. Press the mode button until the desired laser-projection mode is
achieved and the laser line is projected from the laser aperture.
4.When the self-levelling 360°line laser out of levelling, the LED will turn
to red and the laser line will bink.
5.To turn off the laser lines, slide the swith to down position.
• Hanging pictures, photos, or artwork on walls
• Wallpapering and stencil work
• Framing doors and windows
• Installing electrical wiring and pipes
ing
• Installing a drop ceiling
• Painting
• Installing closets
Working Advice
A tripod offers a stable, height-adjustable measuring support. Place the
measuring tool via the tripod mount on to the 1/4" male thread of the
tripod and screw the locking screw of the tripod tight.
For quick checking of heights, the measuring tool can be held by the
contact surfaces laterally against a vertical wall, cabinets, etc. Take care
to hold the measuring tool straightly and calmly.
Laser Viewing Glasses (Accessory)
light of the laser appear brighter for the eyes.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualization of the laser
beam, but they do not protect against laser radiation.
viewing glasses do not afford complete UV protection and reduce colour
perception.
When turning the laser on, always be aware of protecting your eyes and
the eyes of those around you. Never point the laser light at anyone’s face,
including your own.
Lock mode
This mode cannot be used to perform horizontal or vertical levelling,
because the laser lines are no longer self-balancing. In this mode, the
LED indicator will always shine red.
1. Keep the power switch off, press the mode button to turn on the laser.
The laser lines are now locked, and are no longer self-levelling.
2. Press the mode button repeatedly to change the laser-projection mode.
3. Slope your self-levelling 360° line laser level to project a straight line
for reference. In this mode, the laser lines are projected continuously and
will not blink, even if the slope angle exceeds 4°.
4. To turn the laser off ,press the mode button repeatedly until the laser
shuts off.
Applications
Your self-levelling laser level can be hand-held for point marking and
simple alignment by sight, or it can be used to make a “chalk line” using
the lock mode. It is ideal for the following applications:
WARNING!
28
27
360° LASER LINE
