BAUKER PCT162, Original Instruction Manual

EN-14

PLUG REPLACEMENT (ONLY FOR REWIRABLE 

PLUG OF UK & IRELAND)

If you need to replace the fitted plug then follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in accordance with the following code:

BLUE – NEUTRAL
BROWN – LIVE

As the colors of the wires in the mains lead of this appliance may not correspond with the coloured 

markings identifying the terminals in your plug, proceed as follows. The wire which is coloured blue 

must be connected to the terminal which is marked with N. The wire which is coloured brown must be 

connected to the terminal which is marked with L.

WARNING:

Never connect live or neutral wires to the earth terminal of the plug. Only fit an approved 

BS1363/A plug and the correct rated fuse.

NOTE: 

If a moulded plug is fitted and has to be removed take great care in disposing of the plug and 

severed cable, it must be destroyed to prevent engaging into a socket.

Connect

Blue to N

(neutral)

Outer sleeve

firmly clamped

Cable grip

Brown L (live)

13 Amp fuse approved
to BS1362