BAUKER PCT162, Original Instruction Manual

EN-3

Important

 - Please read these instructions fully before starting assembly

General Power Tool Safety Warnings

extension cord suitable for outdoor use. 

Use of a cord 

suitable for outdoor use reduces the risk of electric shock. 

f)   If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply. 

Use of an RCD reduces the risk of 

electric shock. 

3)  Personal safety

a)  Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication. 

A 

moment of inattention while operating power tools may result in 

serious personal injury. 

b)  Use personal protective equipment. Always wear 

eye protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries. 

c)  Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. 

Carrying power tools with your finger on the switch 

or energising power tools that have the switch on invites 

accidents.

d)  Remove any adjusting key or wrench before turning 

the power tool on. 

A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

e)  Do not overreach. Keep proper footing and balance 

at all times. 

This enables better control of the power tool in 

unexpected situations. 

f)   Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves away 

from moving parts. 

Loose clothes, jewellery or long hair 

can be caught in moving parts.

g)  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used. 

Use of dust collection 

can reduce dust-related  hazards.