background image

5019 418 33043

DDEI 5790

Cleaning the grease filter - Fig. 1

Wash the grease filter at least once a month, or 
whenever the grease filter saturation indicator flashes 
(Extraction speed indicator 2).
1. Disconnect the electrical power supply.
2. Remove the grease filters: push the handles back 

(a), and then downwards (b).

3. After cleaning the grease filter refit in reverse 

order, making sure the entire extraction surface is 
covered.

Replacing bulbs - Fig. 2

1. Disconnect the electrical power supply.
2. Use a small screwdriver or any other suitable tool 

to prise off the lamp cover.

3. Remove the burnt-out bulb.

Replace using 20 W max halogen bulbs only, 
making sure not to touch them with your hands.

4. Close the lighting unit (snap-close).

Carbon filter Fitting and Maintenance

Fitting the carbon filter - Fig. 3:
1. 
Disconnect the electrical power supply.
2. Remove the grease filters (a, b).
3. Undo the fixing screw then remove the filter 

holder (f). 

4. Fit the carbon filter (g) inside the filter holder (d). 
5. Place the filter holder on the back tongue (e), then 

fix it to the hood with the screw provided (f).

6. Refit the grease filters.
Carbon filter maintenance:
Unlike traditional carbon filters, this carbon filter can 
be washed and reactivated.
With normal hood use, the filter should be cleaned 
once a month. The best way to clean the filter is in a 
dishwasher at the highest temperature possible, using 
a normal dishwasher detergent. To avoid particles of 
food or dirt settling on the filter during washing and 
giving rise to unpleasant smells, it is advisable to wash 
the filter on its own. To reactivate the filter after 
washing it must be oven dried at 100° C for 
10 minutes.
The filter will retain its odour-absorbing capacity for 
three years, after which it must be replaced.

CONTROL PANEL

A.

Light ON/OFF switch.

B.

ON/OFF and speed 1 selector switch 
(small amount of steam and fumes).

B+C.Speed 2 selector switch (medium amount of 

steam and fumes).

B+D.Speed 3 selector switch 

(large amount of steam and fumes).

1. Control panel
2. Grease filters
3. Grease filter handles
4. Bottom halogen bulbs
5. Telescopic flue

A B C D

FIG. 1

FIG. 2

FIG. 3

PRODUCT SHEET

I

F

NL

E

P

GB

D

GR

41833043.fm  Page 8  Wednesday, November 19, 2003  11:26 AM

Summary of Contents for DDEI 5790







Reviews: