USING THE HOB
A
B
D
The button must be pressed for about 2 sec. to switch the hob on.
The indication
“0”
appears in area
A
on the 4 displays. If within about 25 sec. none of the
cooking zones is activated, the hob switches itself off automatically on safety grounds.
Choose the button for the desired cooking area and press it.
The display of the chosen cooking area becomes brighter.
Press the +/- buttons in area
B
within 5 sec. to adjust the required cooking setting.
The first two cooking steps correspond to the Gentle heat function and the Keep hot
functions (if provided). The other selectable cooking settings go from 1 - 10. The highest
selectable cooking setting equates to the TURBO setting (if provided). The special
functions GENTLE HEAT, KEEP HOT and TURBO HEAT are indicated in the display by a red
arrow. All selections are stopped and cancelled by simultaneously pressing the + and -
buttons.
IMPORTANT: For safety reasons, the hob is equipped with an automatic cut-off function,
which, depending on the set power output, switches off the cooking zone at maximum
power at the earliest after one hour or after 6 hours at minimum power, if no setting
change takes place.
The Dual ring and Auto fast boil SPECIAL FUNCTIONS of each cooking area can be
switched on or off with this button. The appropriate cooking area must be switched on
for the special functions to be selected. The following special functions are available
(if provided):
FAST BOILING FUNCTION
With this function the cooking zone is heated to the
hottest setting for a specified time for bringing to
the boil. It is then automatically switched back to
selected cooking setting to continue cooking
(e.g. selected high setting 5 + fast boil = 5 min. at the
highest s then switching back automatically
to setting 5).
