5019 637 01004
GUIDE TO SELECTING FUNCTIONS
Functions are not available until freezer compartment reaches the temperature below -12°C.
Functions and settings for the refrigerator compartment
Refrigerator compartment door open
Refrigerator compartment temperature setting
Fast cooling
This function should be selected before refrigerating fresh food. To select the function, keep pressing the
menu button until the display shows the fast cooling symbol
. The symbol flashes, press OK to confirm.
The function is automatically disabled after 6 hours, or can be manually disabled by repeating the same
procedure.
Vacation
This function turns the refrigerator compartment to a warmer state if you are going away for some time.
To select the function, keep pressing the menu button until the display shows the vacation symbol
.
Press OK to confirm. To turn the refrigerator back to setting point repeat this procedure.
Important: after activating this function, remove all perishable foodstuffs from the refrigerator
compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent
the formation of unpleasant odours.
ON/OFF
This function turns off both the refrigerator and freezer compartments.
To enable the stand-by function, press the “on-off” button for 3 seconds, two hyphens appear on both
display to indicate that the appliance is on stand-by.
To switch the appliance on again, follow the same procedure until the previously set temperature is shown
on the display.
When the appliance is on stand-by the light inside the refrigerator compartment does not work.
Remember that this operation does not disconnect the appliance from the power supply.
Fridge Stand-by
This function turn off the fridge compartment while the freezer compartment continue to run.
To enable the stand-by function, press the “Fridge stand-by” button for 3 seconds. To switch the fridge
compartment on again, follow the same procedure until the previously set temperature is shown on the
display. When the fridge compartment is on stand-by the light inside the refrigerator compartment does
not work.
Functions and settings for the freezer compartment
Freezer compartment temperature setting
Fast freezing
This function must be activated before freezing fresh food. To select the function, keep pressing the menu
button until the display shows the fast freeze symbol. Press OK to confirm. The function is automatically
disabled after 24 hours, or can be manually disabled by repeating the same procedure.
