Baum 105808H04, User Manual

Common problems and solutions 

16 

8  Common problems and solutions 

So now it happened. Visio Light does not work as expected and you are 

clueless if it is broken. Very often, a small reason can cause a big 

problem, which can be resolved easily. So please read the following 

checklist and try to find out what is wrong. If this does not help, please 

switch off Visio Light, unplug power cable from mains and contact our 

service department.  

Display and lights remain dark 

Please try to switch Visio Light on again. If this does not help, make sure 

power supply is connected to both the Visio Light and wall outlet and that 

wall outlet is live. You may want to connect another device to the wall 

outlet to check. Also check if mains cable is firmly seated in power 

supply! 

Only display remains dark, lights are on 

Is the light in the bottom right of the display on? Is it blue? 

If not, switch display on. The display power button is directly left of the 

light and you can feel that raised button. Best you touch the edge and 

move your finger leftwards until you feel first the light and then the 

button. Now the light should be on and blue.  

If not, please check if power cable in back of display is seated properly. 

Also check if cable from Visio Light to monitor is seated properly on both 

ends. 

Image is blurred 

Check if protective plastic foil is still covering camera lens (remove this 

foil) or whether this lens is dirty. If so, clean with a dry, soft cloth. 

Press zoom+ button to increase magnification. 

Document cannot be read 

Press zoom+ button to increase magnification.  

Try a different document.  

Letters are fluttering 

Increase zoom.  

Try different settings of colour button.