Reading with Poet Compact (Basic functions)
12
This is helpful, if you scan books or documents, which consist of several
pages.
However, if you want to scan a new document, which is completely
different to the previously scanned document, we advise first to execute
the command “Open file” to avoid mixing up the texts.
Each time the Poet is turned on it automatically presents a new blank file
in the text window by default. So, the first scanned document is always a
new document.
To open an empty text window for a new document proceed as follows:
1.
Open the menu by pressing menu key, which is located to the right of
Up key.
2.
The menu opens and presents the entry „Document specification“.
3.
Move with Right key into the sub menu.
4.
The menu item “Open document“ will be presented. In case another
menu item is presented, move with Up key or Down key until you get
this item.
5.
Press OK key. Then you change into the text window and you can
start scanning the new document by pressing Start key.
In case you have not saved the previous document, you get a
corresponding message and an option to save the document.
NB:
If you press the Escape key in the text window also a new document file
is created.
4.6.2 Save a document
You can save the scanned document.
Proceed as follows:
1.
Open the menu by pressing menu key, which is located to the right of
Up key.
2.
The menu opens and presents the entry „Document specification“. In
case another menu item is presented, move with Up key or Down key
until you get the menu item “document specification”.
3.
Move with Right key into the sub menu.
