How to install
Reverse lever handle
Make sure the lock (cylinder) is locked and pull out the mechanical key before reversing
the lever handle.
1. Remove Screw 1. Take out the slide plate and turn it around (refer to Diagram 1 and
Diagram 2 for left-hand or right-hand open), and then fix the Slide Plate by Screw 1.
2. Remove Screw 2. Take out the lever handle and reverse it to the opposite side (refer to
Diagram 1 and Diagram 2 for left hand or right hand open), and then fix the lever handle by
Screw 2.
Back Side of Interior Trim
for Right Open (Diagram 1)
Back Side of Interior Trim
for Left Open (Diagram 2)
Right Open
Left Open
Reverse exterior lever handle
Reverse interior lever handle
-----------------------------------------------------
screw 1
Slide plate
screw 2
There are two reversing switch on the back of exterior plate. When you want to reverse the
lever handle to the other side, push the reversing switch that on the same side of the lever
handle outward, and then turn the lever handle 180
°
from downward at the same time.
Release the reversing switch and the reversing process of exterior lever handle is done!
6
