PROBLEM
CHECK
SOLUTION
Engine cranks over but does not
start.
Auxiliary hydraulic
control turned on.
Turn auxiliary control off.
Battery discharged.
Charge and load test battery. Replace
battery if necessary.
Too cold.
Solenoid failure.
Test solenoid. Replace solenoid if
necessary.
Faulty wiring.
Check for worn or damaged wiring.
Repair wires or replace harness if
necessary.
Engine will not crank over.
Main fuse blown.
Check fuses. Fuse block is located
behind panel (A) on right side.
A
Faulty wiring.
Check for worn or damaged wiring.
Repair wires or replace harness if
necessary.
Fuse Blown.
Over loaded 12 Volt
receptacle.
Unplug load on receptacle. Replace
fuse.
Solenoid failure.
Test solenoid. Replace solenoid if
necessary. Replace fuse.
Exposed wires.
Check for worn or damaged wiring.
Repair wires or replace harness if
necessary. Replace fuse.
34