37
IMPORTANT- The running of water through the inlet hose and filter
must be done, to make sure that any impurities from the
manufacturing process are washed out.
o
Check thoroughly for any leaks.
IMPORTANT- If there are any signs of water leaks, you should follow
the installation procedure stage by stage again.
Troubleshooting
IMPORTANT: If your fridge freezer appears not to be
operating properly, before contacting the Baumatic
Customer Care Department, please refer to the
checklist below.
My fridge freezer does not appear to be working/there
is no power to my appliance.
o
Check that the plug is fully inserted into the power socket.
o
Check that there is power to your mains supply (e.g. that there
hasn’t been a power cut or that the fuse hasn’t blown).
o
Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
My fridge freezer appears to be performing poorly.
o
Check that the appliance isn’t overloaded and that food hasn’t
been packed too tightly into it.
o
Either the fridge or freezer temperature is not set to a low
enough temperature. You should set the fridge and/or freezer
temperature to a lower temperature.
o
Ensure that the doors are closing properly and that the doors
have not been opened for a prolonged period in error.
o
Ensure that there is adequate ventilation for your appliance.
Summary of Contents for B25SE
Page 2: ...s B25SE Side by side frost free fridge freezer...
Page 43: ......
Page 44: ......
Page 45: ...44 www baumatic co uk...
