TECHNICAL DATA
Total power:
450 W
Connection and protection:
AC 2
2
0
-240
V / 50-60 Hz
Overload switch 10 A
Trip characteristic type B or C
Replacement of power cord:
If the power cord needs to be replaced,
choose type H 05 VV-F (insulated in PVC) 3X1.
Differential switch (circuit breaker):
For greater safety, it is advisable to provide the appliance with an automatic differential switch (circuit breaker)
with trip current in compliance with current standards (30 mA).
With protection
≤
100 mA, after a prolonged shutdown of the appliance, the automatic differential switch may trip.
Disconnect the appliance from the electrical mains:
It is advisable to contact a qualified technician.
To disconnect the electrical circuit from the mains, after installation proceed as described below:
Fuses
Pull the power supply plug and extract the fuses completely from the threaded cap.
Automatic protections:
Press the control button (red) until the centre button (black) comes out
Built-in protections:
(Automatic switch with characteristics type B or C):
move the lever from 1 (on) to 0 (off)
Automatic differential switch (circuit breaker):
Move the main switch from 1 (on) to 0 (off) or press the control button.
After it has tripped, make sure the electrical circuit cannot be turned back on.
14
Summary of Contents for BD2SS
