Baumatic BF230, Instruction Manual

8

 
MID-SETTINGS:  Use these settings for long-term storage of food 

in the freezer.   
  
HIGH SETTINGS:  Use these settings to freeze fresh food in your 
freezer and to keep food extra cold in your refrigerator.   
NOTE: 

On maximum setting, your appliance will work harder to maintain 

this low temperature so after you reach this temperature, you should turn 

the knob to a milder setting (depending on long or short-term storage 

intentions). 

COMPENSATOR SWITCH – Press this switch ON should 
the ambient temperature around the appliance drop 
below 10 degrees Celsius.   

NOTE

:  The ambient temperature, temperature of freshly stored 

food as well as how often the door is opened will affect the 

temperature of the freezer and the refrigerator. 

REMINDER:

  Allow

 the unit time to settle after delivery.  If your plug 

and power socket are now behind the fridge and you still need to move the 
unit into place, be especially careful: 

Remember to leave a safe 

distance between the back of the fridge and the wall.

You switch your Fridge-Freezer

OFF

by

turning the thermostat knob to position ‘0’. 

NOTE: 

When you first switch on the appliance, allow 24 hours for 

it to cool down to the desired temperature.  During this time, DO 
NOT open the door often or place a lot of food inside the unit.   

WARNING!  

If the appliance is switched off then switched back on 

again after a short period, the compressor will start up again after 
approximately half-an-hour.  

This is part of the normal operation of the 

appliance

. 

USING your Baumatic BF230 FRIDGE-FREEZER: