Baumatic BF256, Instruction Manual

4

ELECTRICAL SAFETY 

•

NOTE - This appliance must be grounded.  In the event of a malfunction or breakdown, 
grounding will reduce the risk of electric shock by providing a path of least resistance of 

electrical current.  You will be able to tell if it is because a non-grounded appliance will give off 

an electrical discharge.    Manufacturer declines all responsibility for any damage due to non-
grounding of appliance. 

•

DURING THE GUARANTEE PERIOD ONLY BAUMATIC SERVICE ENGINEERS OR AN AUTHORISED AGENT OF 

BAUMATIC SHOULD CARRY OUT REPAIRS ON THIS UNIT. 

•

DO NOT USE IF THE SUPPLY CORD IS DAMAGED.  NEVER TAKE RISKS WITH FIRE! 

ƒ

ENSURE YOU CONNECT THIS APPLIANCE TO A SUPPLY RATED AT 220-240V (or 200-230V) and 50HZ. 

ƒ

NOTE: the supporting structure is constructed in panels of treated sheet steel, electrostatically 

enamelled to resist ill-treatment and to give long-lasting beauty and shine.  

:

Do not attempt to alter the specifications of 
this appliance.  Doing so could damage the 

machine, cause injury & invalidate your 

warranty. DO NOT USE ADAPTERS/SHUNTS. 

:

Do not allow children to play with, near or 

inside this Fridge-Freezer.  

:

Do not pull on the power supply cable to 

free the plug from the wall! 

:

Do not attempt to use your Fridge-Freezer 
outdoors or any place where it is likely to 

come into contact with the elements.  

:

Do not pull out or insert the plug with wet 

hands. 

:

Before any cleaning or maintenance work, 

ensure that the appliance has been 

disconnected from the power supply. 

:

Never allow the back coils of the Fridge-freezer 
to come into contact with any wall surface.  

ALWAYS ENSURE THAT THE SPACE INTO 

WHICH YOU ARE PLACING YOUR APPLIANCE IS 
FREE OF STORED ITEMS SUCH AS PAPERS OR 

OTHER FLAMMABLE MATERIALS. 

:

NEVER block the VENTILATION OPENINGS OF THE 

APPLIANCE EITHER INSIDE OR ON ITS EXTERIOR.  
IT IS VITAL TO KEEP YOUR FRIDGE-FREEZER WELL 

VENTILATED SO THAT THERE IS PROPER AIR FLOW 

BETWEEN THE BOTTOM OF THE UNIT AND THE 

PLINTH / KICK PLATE ON WHICH IT IS SITTING. 

:

WARNING – DO NOT DAMAGE THE REFRIGERANT 

CIRCUIT.  AT THE END OF THE FUNCTIONAL LIFE 

OF THE EQUIPMENT (WHICH USES COOLING GAS 

R600o [ISOBUTANE]) AND INFLAMMABLE GAS 
INSIDE THE INSULATING FOAM, IT MUST BE 

PLACED IN SAFETY BEFORE SENDING IT FOR 

PROPER WASTE DISPOSAL. 

PLEASE OBSERVE ALL INSTALLATION ADVICE IN THIS MANUAL FOR 
SAFE USAGE OF YOUR APPLIANCE. 

 Note

:  Before discarding an old refrigerator/freezer, switch off and disconnect it 

from the power supply.  Cut off and render any plug useless.  Ensure that the door 
cannot jam (removing it is best), regardless of whether or not it can be pushed open 
from inside. AN OLD FRIDGE/FREEZER CAN BE A DEADLY PLAYTHING FOR CHILDREN! 

CONFORMITY TO W.E.E.E. DIRECTIVE

Important Safety Information: 

Please Read this before installing & using.