7
YOU SWITCH ON YOUR APPLIANCE
by PLUGGING IT IN &
SETTING THE REGULATING DEVICE (Electronic Thermostat) inside
the refrigerator compartment at the top (‘1’ in Key on Page 5).
*********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
Your Fridge-Freezer’s thermostat automatically regulates the
inside temperature of the compartments. By rotating the knob,
colder temperatures can be obtained. This is particularly
important for food stored in the freezer.
Thermostat setting : 1-2:
Use this setting for short-term
storage of food in the freezer.
3-4: Use this setting for long-
term storage of food in the
freezer. 5 : Use this setting to
freeze fresh food.
On the maximum setting, your
freezer will work harder to maintain
this low temperature so after you
reach this temperature, you should
turn the knob to a milder setting
(depending on long or short-term
storage intentions).
REMINDER:
Allow
the unit time to settle after delivery. If your plug
and power socket are now behind the fridge and you still need to move the
unit into place, be especially careful:
Remember to leave a safe
distance between the back of the fridge and the wall.
You switch your Fridge-Freezer
OFF
by
turning the thermostat knob to position ‘0’.
NOTE:
When you first switch on the appliance, allow 24 hours for
it to cool down to the desired temperature. During this time, DO
NOT open the door often or place a lot of food inside the unit.
WARNING!
If the appliance is switched off then switched back on
again after a short period, the compressor will start up again after
approximately half-an-hour.
This is part of the normal operation of the
appliance
.
Turning on your Baumatic BF326 FRIDGE-FREEZER:
