16
3)
Using a star-head screwdriver, remove the remainder of
the hinge assembly from around where the pin had
been.
4)
Remove the lower
door by gently sliding
it out (see picture ‘B’)
– see diagram at
right.
5)
Using a small flat-head screwdriver, prise the covering
caps from the socket holes of the other side of the
fridge’s lower side.
6)
Now look at the middle hinge section (to which the top
of the bottom door had been connected). Slide off the
hinge cover ‘
H’.
7)
Disassemble the middle
hinge ‘
C’
using a star-head
screwdriver and remove
the middle hinge
altogether, keeping it in a
safe place nearby.
8)
Carefully slide the top door free from its top hinge pin
(‘K’), remove the hinging accessory from its bottom edge
and replace it on the opposite side with the other
hinging accessory that is provided in the plastic bag.
9)
Using a flat-head
screwdriver,
disassemble the
upper pin ‘
K
’.
REVERSING THE DOOR OPENING (swing of the door):
Summary of Contents for BF337
