background image

o

 

With dry hands, reconnect your appliance to your mains supply. 
You should select the 

HIGH 

temperature setting for a 24 hour 

period, before returning it to the normal temperature setting of 

MID.

 

 

o

 

You should not attempt to freeze fresh food inside the freezer 
compartment until this 24 hour time period has elapsed. 

 

o

 

Do not defrost the appliance with other electrical devices 
(e.g. hair dryer). Do not use sharp metal objects to 
remove the ice on the freezer, as this could cause damage 
to the refrigerant system. 

 
Replacing the light bulb 

 

 

19

WARNING: PLEASE ENSURE THAT YOUR 
APPLIANCE IS DISCONNECTED FROM 
YOUR MAINS SUPPLY BEFORE 
ATTEMPTING TO REPLACE THE LIGHT 
BULB. 

 
 

 
 
 
 
 
 
 
 
 
 
 

o

 

There is an interior light at the top of the back wall of the fridge 
section. 

 

o

 

Remove the bulb cover 

(A) 

by pressing the hook on the bottom 

of the cover. 

 

o

 

Press the hooks on the sides of the light cover and slide the 
cover off. 

 

o

 

Change the present light bulb 

(B)

 with a new one. The 

replacement bulb should not have a greater rating than 15 W. 

 

o

 

Replace the light cover and after waiting five minutes, reconnect 
your plug to your mains supply. 

 
 

Summary of Contents for BF337SS





























Reviews: