Baumatic BF337SS, User Manual

21

Positioning 
 

o

It is advisable that your appliance is only installed in a location 
where the ambient temperature of the room, corresponds with 
the climate classification that is stated on the rating plate of your 
appliance. Your appliance may not function correctly if the 
ambient temperature falls outside of the following ranges. 

Climate classification  Appropriate ambient temperature 

SN 

+10 to +32 degrees centigrade 

N 

+16 to +32 degrees centigrade 

ST 

+18 to +38 degrees centigrade 

T 

+18 to +43 degrees centigrade 

o

Positioning the appliance requires two people in order to avoid 
injuries or damage to the appliance. 

o

Your appliance should not be located in direct sunlight or 
exposed to continuous heat or extremes of temperature (e.g. 
next to a radiator or boiler). If this is not feasible, then you 
should install an insulation plate between the appliance and the 
adjacent heat source. 

o

You should check whether there is an electrical socket available, 
which will be accessible after your appliance is installed. 

o

Place the appliance flatly and firmly on a solid base. The 
appliance is fitted with adjustable feet on the front side, which 
can be used to level the appliance. 

o

Anything positioned above the appliance must be at least 15 cm 
away to allow sufficient cooling of the condenser. You must allow 
a 5 cm gap to the rear and either side of the appliance. 

o

If you are placing another cooling appliance next door to this 
product, then there must be a gap of at least 2cm between the 
appliances. This will help to prevent condensation from forming. 

o

Be sure to leave enough space for the opening of the door, to 
avoid damage to the appliance or personal injury.