Reversing the doors
IMPORTANT: Make sure you have enough room
to lay the appliance on its back, without
damaging or breaking the condenser coils on the
rear of the fridge freezer.
You should also ensure that there are no sharp or hard objects
on the floor in this area.
THE APPLIANCE MUST BE DISCONNECTED FROM THE POWER
SUPPLY BEFORE COMMENCING THE DOOR REVERSAL PROCESS.
CERTAIN SECTIONS OF THIS PROCESS WILL REQUIRE TWO
PEOPLE TO COMPLETE IT.
You must disassemble the lower door first (freezer) and
then the upper door (fridge).
Any parts that you remove
from the appliance whilst reversing the door, should be
retained for later use.
1) Lay the appliance on its back.
2) Remove the plinth
beneath the bottom door
by gently pulling it away
from the fridge freezer
cabinet.
3) Using a star-headed
screwdriver, unscrew the
lower hinge assemblies
(left and right) and lift
them out of their sockets.
22
Summary of Contents for BF337SS
Page 1: ...s BF337SS Frost free fridge freezer...
Page 28: ...28 28...
