21
16)
Look at the middle section where the middle hinge
will go and gently remove the two filler caps. Note that
the holes contain insulation foam which can be bored
into easily.
17)
Take the top door’s bottom hinge socket from the
former opening side of the door. Replace it in the hinge
hole on the other side.
18)
Invert the middle hinge and carefully latch the top
pin into the bottom socket of the top door.
19)
Now attach the middle hinge assembly. Ensure that
the top door can open and close properly and levelly
before you move to the next step.
20)
Reassemble
the hinge ‘C’ and
the support ‘L’ on
the left hand side.
The hinge cover ‘H’
must be remounted
at the end of the
installation.
21)
Reverse the position of the hinge sockets at the
top and the bottom of the bottom door (as you had
done with the top door).
22)
Remount the lower door. If you can, have
someone else hold it so it goes back on straight and
ensure that the top pin fits into its socket properly.
23)
Reattach the bottom hinge, making sure that the
pin fits into its socket properly and it has a washer.
24)
Ensure all hole covering caps are replaced.
NOTE – TEST THE OPENING AND CLOSE OF BOTH DOORS
REVERSING THE DOOR OPENING (swing of the door):
Summary of Contents for BF344
