169890
• Make sure that it has been installed by a suitably quali
fi
ed
person, as per the information contained in Baumatic’s
installation instructions.
• After delivery, wait for three hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process, are allowed to settle.
• The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
soap and water.
• The interior of the appliance should be cleaned with a solution
of sodium bicarbonate dissolved in lukewarm water. The
interior and accessories should be thoroughly dried, after the
cleaning process has been completed.
• There can be an odour when you
fi
rst switch on the appliance.
It will lessen as the appliance starts to cool.
• When
you
fi
rst switch on the appliance, the compressor
will run continuously for approximately 24 hours or until the
refrigerator reaches a cool enough temperature.
• During this period of time, you should try not to open the
door frequently or place a large amount of food within the
appliance.
• If the unit is switched off or unplugged, you must allow at least
5 minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
MODEL WITH BUTTONS
9
Using your Baumatic fridge freezer
Before switching on
During
fi
rst use
Control panel
169890en.indd 9
169890en.indd 9
16.10.2006 11:36:23
16.10.2006 11:36:23