19
Levelling the appliance
o
If the fridge is not levelled during installation, the doors may not
close or seal properly causing cooling, frost or moisture
problems.
o
To level your refrigerator you may either turn the levelling foot
clockwise to raise that side or turn it anti-clockwise to lower that
side.
IMPORTANT: It is advisable that two people carry out this
procedure. While one person adjusts the foot, the other should
push against the top of the fridge to take some weight off the
levelling foot. This makes it easier to adjust the levelling foot.
Reversing the door
IMPORTANT: BEFORE COMMENCING THE DOOR REVERSAL
PROCESS THE APPLIANCE MUST BE DISCONNECTED FROM
YOUR MAINS SUPPLY.
o
We suggest that two people complete the door reversal process.
o
We recommend that the door reversal process is done before the
appliance is placed in its final position.
o
If food is already stored inside of it, then this must all be
removed before beginning the door reversal process.
TOOLS REQUIRED
o
Phillips style screwdriver
o
Flat bladed screwdriver
1. Switch off the appliance at the socket and unplug it.
