Baumatic BR11.2A, Instruction Manual

22

Trace a problem using the table below instead of having to call for help. 

PROBLEM WHAT 

TO 

DO 

CHECK THAT THE PLUG IS WELL-INSERTED INTO THE 

POWER SOCKET 

CHECK THAT THERE IS POWER FROM THE MAINS – 

THERE MAY BE A BLACKOUT OR YOUR FUSES MAY HAVE 
BLOWN. 

CHECK THAT THE ELECTRONIC THERMOSTAT (REGULATOR 

FOUND ON THE INSIDE WALL OF THE FRIDGE-FREEZER 
NEAR THE TOP) IS IN THE RECOMMENDED FUNCTIONING 

POSITION AND NOT ‘0’ (OFF). 

CHECK THAT THE SOCKET IS SUFFICIENT AND NO 

ADAPTER OR EXTENSION LEADS HAVE BEEN USED. 

 
 
 
 
YOUR FRIDGE DOES NOT APPEAR TO BE 
WORKING / NO APPARENT POWER 
 
 

CHECK THAT THE POWER SUPPLY VOLTAGE 

CORRESPONDS TO THE APPLIANCE.  

 
YOU HAVE OVERLOADED THE APPLIANCE OR FOOD HAS 
BEEN PACKED TOO TIGHTLY.  TAKE OUT 

AND CONSUME FOOD; LOOK FOR OUT-OF-DATE FOOD 

THAT CAN BE DISPOSED OF.   
THE THERMOSTAT SETTING IS SET TOO LOW.  SET IT  
HIGHER.  

ENSURE THAT THE DOOR HAS BEEN CLOSED PROPERLY.   

FOR INSTANCE, THERE MAY BE A PROBLEM INSIDE THE 

 UNIT, KEEPING THE DOOR OPEN OR ANOTHER 

 FAULT, SUCH AS A BROKEN OR MISSING 
DOOR SEAL. 
ENSURE THAT THERE IS NO DUST ON THE CONDENSER. 

YOUR FRIDGE APPEARS TO BE 
PERFORMING POORLY  

ENSURE THAT THERE IS ENOUGH ROOM AT THE REAR AND

 SIDES OF THE UNIT. 

THERE IS A NOISE 

THE COOLING GAS WHICH CIRCULATES MAY MAKE 

A SLIGHT NOISE (BUBBLING SOUND) EVEN WHEN 

THE COMPRESSOR IS NOT RUNNING.  THIS IS 
NORMAL.  IF THESE SOUNDS CHANGE, ENSURE: 

YOUR UNIT IS WELL LEVELLED / 

NOTHING IS TOUCHING THE REAR OF THE UNIT / 

NO MATERIAL ON THE APPLIANCE IS VIBRATING. 

NOTE:  A SOUND LIKE FLOWING WATER IS PERFECTLY  

NATURAL AS IT INDICATES THAT THE REFRIGERANT IS 

FLOWING.  THIS IS NOT A MALFUNCTION. 

Troubleshooting