25
8a) Fit the door guides (d) to the appliance door but do not secure
them at this stage.
o
Open the furniture door and the appliance door to their fullest
positions. Both of the doors should still be in contact with each
other.
o
Using a pencil, mark where the edge of the appliance door meets
with the furniture door.
o
From the edge of the furniture door, using a pencil you should
mark a distance, which is the thickness of the cabinet wall + 10
mm. This is where the edge of the door slide (c) should be
placed, in line with the door guide (d).
o
Fix the door slide (c) to the furniture door using the Ø4 x 17
fixing screws (e). The outer edge of the door slide should be
placed on the second pencil mark that you made and in line with
the door guide.
8b) Insert the door guides (d) into the door slides (c) and using the
Ø4.2 x 9.5 fixing screws (f), secure the door guides (d) to the
appliance door, through the predrilled holes.
o
Close the furniture door and appliance door until they are almost
fully shut. In this position the door guide (d) should not come
past the outer edge of the door slide (c). If it does, then your
door slide is too close to the edge of your furniture door and
should be repositioned.
Summary of Contents for BR15.3A
