19
Reversing the swing of the Door
1)
Remove the cover of
the upper hinge (2).
Unscrew the hinge and take
the door off (the door is
not fixed on the lower
hinge).
2)
Unscrew the upper rail
(3); replace it to the
opposite side of the
appliance and fix it.
3)
Replace the fastener (6) and
the washer (5) in reverse order
into the opening of the lower
hinge on the opposite side of the
appliance.
4)
Take off all door corners (8
& 9) and interchange them
(instead of the corner with a
hole (9), insert the one without
the hole (8), and vice versa).
5)
Put the door of the appliance
on the lower hinge (7).
6)
Fix the upper hinge (2) and
cover it.
7)
Replace the slide guides (4)
to the opposite sides of the
door.
8)
Plug the remaining holes
with decorative caps.
9)
Check that the seal is not
creased or damaged. NOTE:
Should the seal not adhere to
the fridge’s casing perfectly,
heat it using a hair dryer, held at
a suitable distance so that the
Reversing the Swing of the Door
