21
FLOWING. THIS IS NOT A MALFUNCTION.
PROBLEM WHAT
TO
DO
ICE FORMATION ON THE INNER REAR
WALL
IN THE UNLIKELY EVENT THAT ICE DOES FORM ON
THE INNER BACK WALL, IT SHOULD BE MANUALLY
REMOVED WHEN IT REACHES 3-5MM THICK, USING
A PLASTIC SCRAPER. MAKE SURE YOU TURN THE
THERMOSTAT DOWN TO ‘OFF’ OR ‘0’ FIRST.
NEVER USE ELECTRIC DEVICES FOR DEFROSTING
OR DEFROSTING SPRAYS.
WATER IS LEAKING FROM THE
REFRIGERATOR
IN CASE THE DISCHARGE WATER OUTLET BECOMES
CLOGGED, OR THE DEFROSTED WATER DRIPS OVER
THE CHANNEL, WATER WILL LEAK FROM THE
FRIDGE.
TO REMEDY THIS:
CLEAN THE CLOGGED OUTLET WITH A PLASTIC
STRAW.
MANUALLY DEFROST THE INCREASED ICE LAYER
INSIDE THE APPLIANCE.
ADDITIONAL NOTE: SHOULD THE CABINET’S SIDE PANEL HEAT UP, THIS IS NORMAL. IT WILL
DO THIS IN SUMMER WITH A HIGH AMBIENT TEMPERATURE OR IF THE DOOR HAS BEEN
OPENED AND CLOSED FREQUENTLY. IT IS THE RESULT OF HEAT’S DISSIPATING FROM INSIDE
THE CABINET AND IS NOT DETRIMENTAL TO YOUR REFRIGERATOR IN ANY WAY.
