15
Fitting the Décor Door -
2)
Fix the slide guides
(attached in a
plastic bag along
with the screws ST
4.2 x 9.5) to the
edge of the door.
Cover the open
holes with the
attached caps.
3)
Hold the appliance
door to the décor
door.
4) Insert the slides into the
guides and fix them on
the kitchen unit door
some 15mm from the
edge, using the A 4 x 12
screws (Fig. 3, at right).
5) Remove the slide guides
and separate the
appliance door from the
door of the kitchen unit.
1)
Using a 3mm diameter bit,
make holes sufficient to
attach the hinge rail brackets
as shown in Fig. 2 on next
pag
e.
INSTALLING YOUR BR200A REFRIGERATOR
