4) Carefully insert the appliance into the housing unit.
o
Make sure that there is at least 4 mm of free space between
the sides of the appliance and the sides of the housing unit.
o
You should also ensure that there is 38 mm between the rear
of the appliance and the back of the housing unit.
5) Use the fixing strip to seal the gap on the side of the appliance.
IMPORTANT: The fixing strip must be placed on the same side that
the fridge freezer is hinged on, i.e. not the side that the door opens
from.
25
Summary of Contents for BR22.8A
Page 1: ...BR22 8A Built in combi fridge freezer...
Page 32: ...32 32...