29
PROBLEM WHAT
TO
DO
CHECK THAT THE PLUG IS WELL-INSERTED INTO THE POWER SOCKET. PLUG
IN IF NECESSARY.
CHECK THAT THERE IS POWER FROM THE MAINS – THERE MAY BE A
BLACKOUT OR YOUR FUSES MAY HAVE BLOWN.
CHECK THAT THE ELECTRONIC THERMOSTAT HASN’T BEEN TURNED ALL THE
WAY DOWN TO ‘OFF’.
CHECK THAT THE SOCKET IS SUFFICIENT AND NO ADAPTER OR EXTENSION
LEADS HAVE BEEN USED.
YOUR
FRIDGE
DOES NOT
APPEAR TO
BE WORKING
/ NO
APPARENT
POWER
CHECK THAT THE POWER SUPPLY VOLTAGE CORRESPONDS TO THE
APPLIANCE.
YOU HAVE OVERLOADED THE APPLIANCE OR FOOD HAS
BEEN PACKED TOO TIGHTLY. TAKE OUT
AND CONSUME FOOD; LOOK FOR OUT-OF-DATE FOOD
THAT CAN BE DISPOSED OF.
THE THERMOSTAT SETTING IS SET TOO LOW. SET IT
HIGHER.
ENSURE THAT THE DOOR HAS BEEN CLOSED PROPERLY.
FOR INSTANCE, THERE MAY BE A PROBLEM INSIDE THE
UNIT, KEEPING THE DOOR OPEN OR ANOTHER
FAULT, SUCH AS A BROKEN OR MISSING
DOOR SEAL.
ENSURE THAT THERE IS NO DUST ON THE CONDENSER.
YOUR
FRIDGE
APPEARS TO
BE
PERFORMING
POORLY
ENSURE THAT THERE IS ENOUGH ROOM AT THE REAR AND
SIDES OF THE UNIT.
THERE IS A
NOISE
THE COOLING GAS WHICH CIRCULATES MAY MAKE
A SLIGHT NOISE (BUBBLING or a SOUND LIKE RUNNING WATER) EVEN
WHEN THE COMPRESSOR IS NOT RUNNING. THIS IS NORMAL. IF THESE
SOUNDS CHANGE, ENSURE:
YOUR UNIT IS WELL LEVELLED / NOTHING IS TOUCHING THE REAR OF THE
Troubleshooting
