11
uring first use
o
You should set the thermostat dial to its maximum setting for 24
o
When you first switch on the appliance, the compressor will run
During this period of time, you should try not to open the door
o
You should then adjust the thermostat dial down to its normal
If the unit is switched off or unplugged, you must allow at least 5
witching on the appliance and setting the thermostat
ou switch on your appliance by connecting it to your mains supply
o
The thermostat automatically regulates the temperature inside
o
You should turn the thermostat dial clockwise.
o
If the arrow is positioned to the smaller dots, then you will get a
If the arrow is positioned to the larger dots, then you will get a
D
hours after switching on the appliance for the first time.
continuously for approximately 24 hours or until the fridge
freezer reaches a cool enough temperature.
o
frequently or place a large amount of food within the appliance.
operating position.
o
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
S
Y
and setting the thermostat. The thermostat dial is located on the
control panel, which can be found at the top of the fridge freezer.
the fridge freezer, depending on which setting you have turned
the thermostat dial to.
higher temperature inside the fridge and freezer sections.
o
lower temperature inside the fridge and freezer sections.
Summary of Contents for BRB2617
Page 1: ...BRB2617 Built in combi frost free fridge freezer ...
Page 38: ......
Page 39: ...39 ...
Page 40: ...40 ...