o
The interior of the appliance should be cleaned with
a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o
There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o
When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge
reaches a cool enough temperature.
o
During the period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o
If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
reconnecting it to your mains supply.
Turning on the appliance and setting the thermostat
You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat control knob is located on
the upper right hand side of the outside of the cabinet.
o
The thermostat automatically regulates the temperature inside
the fridge, depending on what number you have turned the
thermostat control knob to.
o
Position <0FF> means that the appliance will not cool. However
the light will still function.
o
Position <MIN> will give you a higher temperature inside the
fridge.
o
Position <MAX> will give you a lower temperature inside the
fridge.
10
