Baumatic BW150SS, Instruction Manual

Troubleshooting 

IMPORTANT: If your wine cooler appears not to be 
operating properly, before contacting the Customer 
Care Department, please refer to the checklist 
below.

PROBLEM POSSIBLE 

CAUSE 

Appliance does not operate 

Not plugged in. 

The circuit breaker has tripped or the 
fuse has blown. 

Temperature inside the appliance is too 

warm. 

The temperature controls are set too 

warm. Set the temperature controls to a 
cooler setting and allow several hours for 

the temperature to stabilise. 
The door is being kept open too long or is 

being opened too frequently, which is 
allowing warm air to enter the appliance. 

The door is not closed completely. 
The door gasket is not sealing correctly. 
The appliance has recently been 

disconnected from the mains supply; it 
will take at least four hours for it to get 

down to temperature again. 

Temperature inside the appliance is too 
cold 

The temperature controls are set too 
cold. Set the temperature controls to a 

warmer setting and allow several hours 
for the temperature to stabilise. 

Vibration 

Check to ensure that the appliance is on 

a level surface. 
The appliance is touching the back wall 

behind it. Reposition the appliance and 
move it from the wall. 

If vibration continues to occur, then turn 
off the appliance and unplug it from your 
mains supply. Then contact the Customer 

Care Department for assistance. 

Moisture is forming on the inside of the 
appliance. 

The door is slightly open. 
The door is being kept open too long or is 

being opened too frequently. Open the 
door less often. 

The door is not sealed properly. 

Moisture is forming on the outside of the 
appliance. 

The door is slightly open, causing cold air 
from inside the appliance to meet warm, 

moist air from the outside. 

22