20
Built-in installation
o
The dimensions shown in the diagram above will need to be
followed.
o
The ventilation requirements shown in the diagram above must
be followed.
o
To protect the glass door prior to installation the appliance is
fitted with 4 white levelling feet which prevent the glass door
touching the floor before it is installed.
o
The white levelling feet need to be replaced with the 2 black
levelling feet provided before the appliance is installed. The 2
black feet need to be attached to the front bottom of the
appliance.
o
The black feet should then be adjusted to their lowest setting by
rotating the feet. After inserting the appliance into the cabinet
you can then adjust the feet to ensure the front of the appliance
is level with the adjacent cabinets.
Summary of Contents for BWC455BGL
