Cleaning your Baumatic cooker hood
IMPORTANT: BEFORE CLEANING, ALWAYS
ENSURE THAT YOU HAVE SWITCHED YOUR
COOKER HOOD OFF
AT THE OMNI-POLAR
SWITCH, SET AT THE WALL FROM THE MAINS
CABLE.
Cleaning
o
Clean the external parts of your cooker hood with mild liquid
detergent and a new damp cloth.
o
Never use abrasive powder, corrosive solvents or brushes.
o
Never insert pointed objects into the motor’s protective grid.
o
Only clean the control panel and grease filter with mild liquid
detergents and a new damp cloth.
o
If you are using the appliance in recirculation mode, then be
sure to replace the carbon filter at the recommended intervals
(see section on “Fitting the carbon filter”). A build up of grease
on the carbon filter could cause a fire hazard.
o
Never attempt to clean the area above the grease filters, as
there could be sharp edges in this location.
The grease filter
o
Your cooker hood includes a grease filter which helps to absorb
grease particles and to protect your kitchen & furniture from
greasy residues.
o
The metallic filter may become flammable if it becomes
saturated with this greasy residue.
o
To prevent a fire hazard, the filter should be cleaned regularly.
Depending on use, this should be done every 10-15 days or at
least once a month, using hot water and normal washing-up
detergent.
o
DO NOT WASH THE GREASE FILTERS IN A DISHWASHER.
13
Summary of Contents for ISL4SS
Page 1: ...ISL4SS 40 cm Island hood ...
Page 32: ...32 32 ...