Controlling your cooker hood
o
Use the ON/OFF button to switch the cooker hood on.
o
Use the plus and minus buttons to regulate the speed that the
motor is running at.
o
The speed level that you have selected will appear on the LCD
display.
o
To switch the cooker hood off, press the ON/OFF button again.
The timer button
o
If you press the timer button whilst the cooker hood is in
operation, then it will countdown for 15 minutes.
o
During the countdown the light around the timer button will
flash.
o
When the countdown has finished the cooker hood will switch
off.
o
If you press the timer button again during the countdown, the
light around the timer button will go out and the cooker hood will
return to normal operation.
Grease filter maintenance reminder
o
After approximately 30 hours of operation, the timer button will
glow red. This means that the grease filters need to be cleaned.
o
You should follow the grease filter cleaning operation that is
outlined on pages 11-12 of this instruction booklet.
o
When the grease filters have been put back in position, turn on
the hood and then hold down the timer button until the red light
goes out.
o
Turn the hood off and then back on again, to check that the
alarm has been reset.
o
IMPORTANT:
The grease filter should be cleaned at the time
intervals suggested on page 11. You should not wait until the
maintenance alarm activates before cleaning the grease filter.
10
IMPORTANT: TO MAINTAIN THE CORRECT
FUNCTIONING OF THE CONTROL PANEL, WE
RECOMMEND THAT YOU REGULARLY CLEAN THIS
AREA.
