Important safety information
e.
Your safety is of the utmost importance to Baumatic. Please make sure that you read this
instruction booklet before attempting to install or use the appliance. If you are unsure of any
of the information contained in this booklet, please contact the Baumatic Advice Lin
IMPORTANT: Any installation work must be carried out by a qualified electrician or
competent person.
Use of the appliance
o
Your appliance is only designed to be used in the home. It is suitable for storing food that
needs to be chilled and refrigerated. If it is used for any other purpose or it is not used
correctly, then Baumatic Ltd. will accept no liability for any damage that is caused.
o
Altering the specification of the appliance must not be attempted for reasons of safety.
Before using your appliance
o
Check the appliance for any signs of transport damage. If you notice any damage, then you should not
connect your appliance to your mains supply and should contact your retailer.
Refrigerant
o
Your appliance contains R600a refrigerant, which is a natural gas that does not contain CFCs that can damage
the environment. However it is a flammable substance, therefore care should be taken:
During the transportation and installation of the appliance, make sure that the refrigeration
pipework does not get damaged.
If it does become damaged then sources of ignition and open flames should be avoided.
Also the room that the appliance is situated in should be thoroughly ventilated.
o
Do not place any objects on top of the appliance, as this may damage the table top.
Child safety
o
Packaging material should be kept away from children.
o
Children should not be allowed to touch the controls or play with the appliance.
General safety
o
Do not pull on the power supply cable to remove the plug from your mains supply socket.
o
Do not pull out or insert the plug with wet hands.
o
Do not attempt to use your appliance outdoors or any place where it is likely to come into
contact with the elements.
o
Before cleaning the appliance or performing maintenance work, ensure that the appliance has been
disconnected from your mains supply.
o
Never allow the back coils of the appliance to come into contact with the wall surface.
5
