The dispenser
When your fridge/freezer is first connected to your mains supply, it will
automatically select chilled water mode and the water symbol will
light.
Before first use
You should not attempt to dispense ice for 24 hours after
the appliance is first connected to your mains supply.
o
Once the fridge and freezer sections have cooled sufficiently
place a cup against the PUSH pad in the dispenser and pour out
a couple of glasses of water.
o
IMPORTANT:
These first couple of glasses should not be drunk
and the water should be poured down the sink.
Using the dispenser
o
The dispenser can produce chilled water and cubed ice.
o
Press the
WATER or ICE
dispensing button to select what you
want the dispenser to produce.
o
Place a cup against the pad in the dispenser and push it, after a
few seconds it will dispense water or cubed ice. What comes out
of the dispenser will depend on what option you selected before
pushing the pad.
o
You should place the glass directly underneath the water/ice
chute and not rest it on the base of the dispenser. Otherwise
water/ice can spill or splash.
o
When the dispenser is producing ice, you should remove the
cup/glass from the dispenser chute when it is half full, otherwise
you may get ice overflowing or the dispenser outlet could
become blocked.
o
Shortly after ice has come out, you will hear a snapping sound
which is a shut off valve operating; this stops further ice from
being dispensed.
o
1 hour after you have dispensed cubed or crushed ice, the
selection mode will return to chilled water automatically.
19
