Installation preparation
IMPORTANT: A minimum of two people should
complete all of the installation steps given in this
manual.
o
Check that the appliance will easily pass through all doorways en
route to its final position.
o
Appliance dimensions: 1770 mm(h) x 906 mm(w) x 735 mm(d).
(including door handles).
o
If your appliance will not fit through a doorway, then it is
possible to remove the fridge and freezer doors.
Removing the freezer door
If the front bottom cover has already been attached, then it should be
removed before attempting to remove the door.
1) Push down the left hand
collar of the coupling first, and
whilst doing this, pull out the left
hand water tube.
2) Unscrew the top hinge cover
using a screwdriver. Insert a thin
screwdriver into the side groove of
the cover to remove it.
3) Turn the top hinge fastener anti-
clockwise 3-4 times and then
disconnect the harness wires.
30
4)
IMPORTANT:
One person should
support the door before attempting
this next step. Lift up the front of
the hinge and remove it from the
appliance.
