o
IMPORTANT: When removing the hinge and separating it
from the door, make sure that the door is supported to
stop it falling forward.
o
Lift the left hand door off of the lower hinge and place it to one
side.
o
IMPORTANT: The door should be lent carefully against a
wall, so that the inner or outer surfaces cannot be
accidentally damaged.
o
After you have located the fridge freezer in its final position, the
door should be refitted, following the above process in reverse.
Ensure that the wire cable connector, water pipe, door and top
cover are all refitted into their original positions.
Removing the upper freezer drawer
o
Open the upper freezer drawer as far as possible.
o
Remove the ice maker tray and divider.
o
Pull the rear of the inner compartment of the drawer slightly
upwards, to enable the front section to be released from the
drawer.
o
Hold and pull the front section of the inner compartment of the
drawer upwards, to remove it from the drawer.
o
Undo the retaining screws that hold the upper freezer drawer to
the telescopic runners.
o
Lift the upper freezer drawers upwards and then remove it from
the main body of the appliance.
42
Summary of Contents for TITAN5
