12
Using your Baumatic fridge freezer
Before switching on
o
Remove all packaging materials before using the fridge freezer.
This includes the foam base and all adhesive tape holding the
refrigerator accessories in place both inside and outside the
appliance.
o
Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o
After delivery, wait for six hours before connecting the appliance
to your mains supply. This means that any refrigerant gasses
that may have been disturbed during the transportation process
are allowed to settle.
o
The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o
The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o
There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
You switch on your appliance by connecting it to your mains supply
and setting the thermostat.
o
When you first switch on the appliance, the compressor may run
continuously for approximately 24 hours or until the fridge
freezer reaches a cool enough temperature.
o
During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o
If the unit is switched off or unplugged, you must allow at least 5
minutes before reconnecting it to your mains supply.
o
If there is a power cut, the appliance will remember the
temperature settings that were set previously.
Summary of Contents for TRIO.BL
Page 1: ...s TRIO BL 323 Litre 3 door combi frost free fridge freezer...
Page 34: ...34...
Page 36: ...36...
