OIS-P, PC3141/03 Manual
Baumer Ident
41
Technical Data
Terminal cable
For connection of the terminal a cable with the
following specification must be used :
Max AWG
24 AWG
Min copper area
0.22 mm
2
Shielding
Common
Maximum diameter 12.0 mm
Minimum diameter
8 mm
Maximum length
3 m
Number of wires
3
Digital inputs/outputs cable
Max AWG
24 AWG
Min copper area
0.22 mm
2
Maximum diameter 12.0 mm
Minimum diameter
8 mm
Maximum length
100 m
Shielding
Common
Other parameters as the cable length, number of
pairs, DC resistance etc. must be chosen
according to the application requirements.
All cables.
Metal housing connected to shield and ferrite close
to Central Unit is required.
8.5 Environmental specification
Temperature range
-40 to +70 °C (storage)
+5 to +40 °C
(operating)
Vibration
Sine:
±0.35 mm 10-60 Hz,
1g 60-150 Hz
in ± 3 axis.
Ref.:
IEC 68-2-6 Test Fc
EMC
According to pr ETS 300339 including:
Emission
EN550022, class B
Immunity
ENV 50141 80-1000 MHz
3V, AM 80% at 400 Hz
EFT/burst
IEC 801-4 2 kV
ESD test
IEC 801-2 4/8 kV
Summary of Contents for OIS-P PC 3100 series
