NE214
www.baumer.com
37
4 Operating mode
The operation and use of the counter are described in this section.
●
As soon as the power supply has been switched on, the counter
is automatically set to the operating mode.
In the operating mode:
-the current counter status can be read and reset;
-the input preset values can be read and changed if required;
-the overall total can be read and reset;
-the start count value can be read and changed if required;
-the operating hours counter can be read and reset.
All the parameters can be disabled in the programming mode.
Reset
Current main counter status XP
➜
Read counter status „XP“.
➜
Press the
key.
To change
Preset value P1
➜
Press the
key.
The preset value P1 can be read off in the display.
➜
Enter preset value P1 with keys
and
.
Sign possible following release in line 38.
➜
Press the
key.
●
Change completed.
To change
Preset value P2
➜
Press the
key.
The preset value P2 can be read off in the display.
➜
Enter preset value P2 with keys
and
.
Sign possible following release in line 38
➜
Press the
key.
●
Change completed.
To change
Start count value „SC“
➜
Press the
key.
The current start count SC can be read off in the display.
➜
Enter start count SC with keys
and
.
Sign possible following release in line 38
➜
Press the
key.
●
Change completed.
Reset
Totalizer „∑“
➜
Press the
key.
The current total value can be read off in the display.
➜
Press the
key.
Reset
Hour counter „ “
➜
Press the
key.
The hour counter can be read off in the display.
➜
Press the
key.
If a key is not operated within 15 seconds, the previous value will
automatically be re-displayed.
