NE214
38
www.baumer.com
5 Programming mode
Operating parameters are set in the programming mode, which is
structured in three programming segments.
Programming field 1
In the first programming segment, all the operating parameters can
be accessed and changed. The operating parameters which are dis-
abled in the operating mode are also displayed here. The first pro-
gramming segment consists of 6 lines.
Programming field 2
In the second programming segment, the individual operating pa-
rameters for access to the operating mode can be disabled and
enabled (status). In the first programming segment, access is possi-
ble to these disabled operating parameters.
Programming field 3
In the third programming segment, all the machine-related functions
and values can be programmed, together with the analog output.
Key assignments
The same key assignments apply to the individual programming seg-
ments. Since key functions may vary in the operating and program-
ming modes, however, all the functions are described in full below.
Function in the operating-
and programming mode
Key
Transfer to the next operating parameter in the operating- and pro-
gramming modes. For a fast run-through, hold the key down.
Function in the operating-
and programming mode
Key
Transfer from programming to operating mode and vice versa.
Function in the operating-
and programming mode
Key
Select the first or next required decade.
The selected decade position flashes.
Function in the
operating mode
Key
Deletes the display.
Function in the
programming mode
Deletes the display. Value reset to zero. Reset of possible program-
med operating parameters.
Function in the
operating mode
Key
Transfer from any display to a parameter corresponding the selection
in line 39.
Function in the
programming mode
In conjunction with the
key, transfer to programming mode.
Function in the
operating mode
Key
When this key is pressed, the respective decade position advances
by one value.
Function in the operating-
and programming mode
When the key is pressed, the respective decade position advances
one value until the maximum set value is reached.
