NE214
www.baumer.com
49
6 Technical data
Technical data - electrical ratings
Voltage supply
115/230 VAC ±10 % (50/60 Hz)
24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 %
Power consumption
7 VA, 5 W
Sensor supply
12...26 VDC / max. 100 mA
Display
LED, 7-segment display
Number of digits
6-digits
Digit height
14 mm
Function
Preset-/ Main counter with 2 presets
Batch counter with 1 preset, Totalizer,
Hour counter
Scaling factor
0.0001...9999.99
Multitplier / batch counter
1...999
Count modes
Adding or subtracting,
A-B difference (difference counting)
A+B total (parallel counting),
Up/Down, A 90° B phase evaluation
Counting frequency
3 Hz, 25 Hz, 10 kHz programmable
Operating modes
Step preset, Main preset, Parallel
alignment, Trailing preset
Data memory
>10 years in EEPROM
Reset
Button, electric or automatic
Outputs electronic
Optocoupler
Outputs relay
Potential-free change-over contact
Output holding time
0.01...99.99 s
Analoge output
0(2)...10 V, 0(4)...20 mA
Interfaces
RS232, RS422, RS485
Standard DIN EN 61010-1
Protection class II, Overvoltage
category II, Pollution degree 2
Emitted interference
DIN EN 61000-6-3
Interference immunity
DIN EN 61000-6-2
Programmable parameters
Operating modes, Sensor logic,
Scaling factor, Count mode, Control
inputs
Approval
UL approval / E63076
Technical data - mechanical design
Ambient temperature
0...+50 °C
Storing temperature
-20...+70 °C
Relative humidity
80 % non-condensing
E-connection
Plug-in screw terminals
Core cross-section
1.5 mm²
Protection DIN EN 60529
IP 65 (face with seal)
Operation / keypad
Membrane with softkeys
Housing type
Built-in housing
