Self-Propelled Lawnmower
11
•
If the blade strongly impacts an obstacle, stop the lawnmower and take it to an authorised service centre.
•
BLADE: the blade is made from pressed steel. To achieve the best possible mowing results, regularly
sharpen the blades, approximately after every 25 hours of operation. Check that the blade is always
correctly balanced. To do this, insert a steel axle (with a diameter of 2-3 mm) into the middle hole. If it is
correctly levelled, the axis will remain in the horizontal position.
•
If the blade does not remain in the horizontal position, replace it.
•
When removing the blade, screw out the bolt, check the load bearing part of the blade. If the parts are worn
out or damaged, replace them.
•
ATTENTION
: Always use only original spare parts. Poor quality spare parts may cause serious damage to
the lawnmower and create a safety hazard.
Service
•
In the event that after purchasing the product you find any kind of defect, contact the manufacturer.
•
When using the product, follow the instructions contained in the included user’s manual.
•
A complaint will not be accepted if you modified the product or if you did not follow the instructions in this
user’s manual.
Storage
If you will not be using the machine for an extended period of time, store it according to the following
instructions. This will extend the lifetime of the machine.
•
Fully drain fuel from the fuel tank and the carburettor.
•
Screw out the spark plug and pour a small amount of motor oil into the socket. Gently pull the pull cord 2 to 3
times.
•
Use a clean cloth to clean the exterior surfaces. Store the machine in a clean dry location.
Technical Specifications
Engine
OHV, air-cooled, 4 stroke
Torque/Speed
2.5 kW/3000rpm
Displacement
165cc
Steel Deck
18”
Starting System
Recoil/Pull Start; Self-propelled
Fuel Tank Capacity
1.2L
Fuel type
Unleaded 95+ RON
Oil Tank Capacity
0.6L
Recommended Oil
SAE30, 15W-40
Cutting Height
25-70mm
Wheels
7” front, 10” rear
Grass Catcher
Capacity
55L
