Self-Propelled Lawnmower
4
Set-Up
Preparation
•
Before assembling and starting the petrol lawnmower, first carefully read the entire user’s manual and the
instructions contained in it.
•
IMPORTANT INFORMATION
: The lawnmower is supplied
WITHOUT FUEL AND OIL
in the engine.
•
Your new lawnmower was tested at the production plant meaning that a small amount of residual oil may be
in the engine.
•
Take the lawnmower out of the cardboard packaging and check that no loose parts are left in the packaging.
Assembling the Handle
IMPORTANT INFORMATION
: Carefully unfold the lawnmower handle, being careful not to pinch or damage the
lawnmower's control cables.
1. Insert the bottom part of the handle (point 1) into the respective hole on the lawnmower (see arrow) and
secure in place with 4 screws – two screws on each side of the handle.
2. Attach the top part of the handle (point 2) to the bottom part of the handle using the included screws with the
quick coupler and wing nuts (point 3).
IMPORTANT NOTICE
: After loosening the quick coupler, it is possible to comfortably adjust the height of the
handle and to select the most comfortable work position.
