MC4 40V Battery Powered Brush Cutter
E&OE
©2018 Bäumr-AG
5
Carbon-Monoxide Hazard
Do not use the product in
confined areas or without
adequate ventilation. Carbon-
monoxide poisoning can be
fatal.
Pull Hazard
Be aware that the product
contains or uses mechanical
devices that can pull in objects
and can cause severe injury to
fingers, limbs etc. Take due
care when handling and using
the product.
Slope / Fall Injury Hazard
Be aware that using the
product on sloping surfaces or
in slippery conditions may
present additional dangers
from falls and contact with
blades, moving parts, hot
surfaces etc.
"Slam Dunk" Warning
Do NOT attempt "slam dunk"
maneouvres as this may result
in severe injury due to falling,
product breakage or collapse
etc.
Electrocution / Electrical
Shock Hazard - Outdoor
High voltage or high current
electricity may be present or
required by the product. Do
NOT use in rain, damp or wet
conditions. Electrical shock
can be fatal.
Electrocution / Electrical
Shock Hazard - Disconnect
High voltage or high current
electricity may be present or
required by the product.
Always disconnect the product
from the electrical supply
before handling the product,
adjusting, maintenence etc.
Power Line Electrocution
Hazard
High voltage / high current
power lines may be present.
Use extreme caution to avoid
contact or interference with
power lines. Electrical shock
can be fatal.
"Kick-Back" Hazard
High level of "kick-back"
hazard that can cause the
machine to suddenly rotate
towards operator. Kick-back
injury can be fatal.
Winch Operator Position
Hazard
Do NOT stand between winch
and load. Do NOT use winch
to move people.
Winch Lift Hazard
Do NOT LIFT load vertically.
Use machine to PULL only.
Cable Hazard
Ensure that load bearing cable
is not kinked or knotted.
Winch Cable Hazard
Ensure that there is a
minimum number of cable
coils on winching mechanism.
Winch Hook Hazard
Carry hook to load – do NOT
throw or run.
